RunCam Device Protocol
RunCam Device Protocol could be the communication that is serial initially developed for the RunCam separate and analog digital digital cameras.
The protocol itself supports not just camera that is full menu navigation but additionally triggering recording on separate style digital digital cameras also interacting the available sd-card room, syncing the existing date, composing to your osd and switching the digital digital camera or wifi function (if available) off and on.
Not all the features of the protocol are currently supported in betaflight but both betaflights help and also the protocol it self have been in continued development.
Recently comparable to TBS Smartaudio and IRC Tramp other programs (as an example Caddx) started initially to follow help for the protocol within their digital digital cameras.
Presently supported features in betaflight
The protocol that is current can be located right here:
Supported cameras/devices and functions
Analog/classic fpv cameras
Any RunCam Camera that supports UART digital camera settings should work.
Micro Swift 3, Runcam Racer 2, etc.
RunCam Split cameras (1,2,mini and mini 2 etc.) also work nevertheless may necessitate a firmware revision. The runcam that is first delivered with another type of protocol – ensure that you update it in any event as more recent firmwares enhanced different things.
OSD Menu Control
Going into the menu that is osd alter settings should use the exact same stick commands as FPV Camera Control
Camera Button Simulation (Record/Photo/Wifi/Power Key)
Firmware: BetaFlight Firmware (в‰Ґ3.2.0) Configurator computer software: Betaflight Configurator (в‰Ґ3.2.0)
Any available UART program on the BetaFlight
1.Connect the RunCam separate using the UART program associated with trip Controller
2.Make the trip Controller recognize the Split
For instance, we connect the separate towards the UART 3 user interface in the BetaFlight: link the journey controller to your computer, open the Betaflight then Configurator. Into the Peripherals line associated with the line UART3 (from the Ports tab), choose RunCam unit and then click Save And Reboot.
3.Instructions associated with the functions of this camera and assigning transmitter networks for them
Into the Betaflight Configurator, navigate to your Modes tab. You can find brand new CAMERA WI-FI, CAMERA ENERGY and CAMERA CHANGE modes.
CAMERA WI-FI: turn on/off the WIFI for the digital camera. Whenever within the OSD associated with digital camera, this really is utilized to ensure your selection. CAMERA ENERGY: start/stop the video clip. Whenever when you look at the OSD associated with digital camera, this is certainly utilized to go into the menu item that is next. CAMERA CHANGE MODE: switch among the list of three modes, movie, photo and OSD mode that is setting. Whenever into the OSD of this digital digital camera, this may leave the menu. Assign any channel that is available the big event you will need, as an example:
Assign the AUX1 into the CAMERA WI-FI, range 1900-2100 Assign the AUX2 towards the CAMERA ENERGY, range 1900-2100 Assign the AUX3 into the CAMERA CHANGE MODE, range 1900-2100
4.Assign the channel towards the switch associated with controller
Please select your Model in the controller, then usage of the Mixer software and designate the channel into the switch associated with controller. Take opentx 2.2.0 as an example, assign the channels CH5, CH6, and CH7 to SA, SB, SD correspondingly.
Energy the Flight Controller therefore the RunCam separate
Set the SA towards the base, the digital digital digital camera turns on/off the WIFI Set the SB to your base, the camera starts/stops the video clip Set the SD to your base, the digital digital camera switches one of the three modes: video clip, picture and OSD environment mode
Caddx Turtle v2
Caddx additionally applied help when it comes to RunCam Device protocol via their final firmware upgrade. Take note nevertheless that just the turtle v2 correctly supports UART settings because the v1 had some connections that are incompatible the board despite having UART pads.
For the v1 it is possible to use FPV Camera still Control to enter the OSD and get a grip on the digital camera via your transmitter.
Beware that OSD control is disabled during recording.
OSD Menu Control
Going into the osd menu to alter settings should make use of similar stick commands as FPV Camera Control
Camera Button Simulation (Recording)
Just like the RunCam Split recording that is starting/stopping a switch is supported. Stick to the directions outlined above to create it.
Other supported devices
RunCam Control Adapter (OSD Cable Simulation)
The RunCam Control Adapter, which links involving the OSD pin and an UART regarding the FC, enables navigation associated with OSD menu through the transmitter. Unlike the FPV Camera Control nevertheless no resistors that are additional capacitors are needed.
With regards to the unit some shortcut keys are additionally supported. For instance keeping roll pressed to towards the right will switch the presently chosen scene when utilizing a Micro Swift2.